No.665 Lehu Road, Shahu Industrial Zone,
Liushi town,Yueqing City, Zhejiang Province.
P.C:325604.
Tel:+86 577 62755561 / 62757760
Fax:+86 577 61728670 / 62757761
E-mali:jacky@socomepower.com
        socome@yahoo.cn
Http://www.socomepower.com
Contact to :Jacky Yin (+86 13868763716)
Dual Wall Tubing (With hot melt Adhesive) Shrink Ratio 3:1,4:1
Operating temperature:-45to+125
Minimum shrink temperature:80
Minimum fully recovery temperature:120
Standard color:Black Special color:Red,Blue,White,Yellow
Technical Data
Property
Method of test Typical data
Tensile strength
ASTM D2671 >10.4Mpa(min.)
Tensile strength after aging(158/168hrs.)
ASTM D2671 Remains 70%
Elogation at break
ASTM D2671 >300%(min.)
Elongation after aging(158/168hrs.)
ASTM D2671 100%(min.)
Heat shock
UL 224 0 to - 10%
Longitudinal shrinkage
250,4HRS No Cracking
No dropping
Cold bend(-30/1hrs.)
ASTM D2671 No cracking
Voltage withstand(AC 2500V/60 seconds)
ASTM D2671 No cracking
Product Dimensions
Normal size AS supplied(mm) After recovered(mm) Standard length(m)
(mm) (inch) Inside diameter(Min.) Inside diameter(Max.) Total wall thickness(Min.) Adhesive thickness(Nom.)
Shrik ratio 3:1
3/1 1/8 3.0 1.0 1.00 0.5 1.22
4.8/1.5 3/16 4.8 4.5 1.00 0.5 1.22
6/2 1/4 6.0 2.0 1.00 0.5 1.22
9/3 3/8 9.0 3.0 1.40 0.6 1.22
12/4 1/2 12.0 4.0 1.60 0.8 1.22
19/6 3/4 19.0 6.0 2.15 0.8 1.22
24/8 1 24.0 8.0 2.40 1.0 1.22
30/10 1 1/4 30.0 10.0 2.40 1.0 1.22
40/13 1 1/2 40.0 13.0 2.40 1.0 1.22
50/19 2 50.0 19.0 2.40 1.0 1.22
Shrind ratio 4:1
4/1 3/16 4.0 1.0 1.00 0.5 1.22
6/1.5 1/4 6.0 1.5 1.00 0.5 1.22
8/2 5/16 8.0 2.0 1.00 0.5 1.22
12/3 1/2 12.0 3.0 1.40 0.6 1.22
16/4 5/8 16.0 4.0 1.60 0.8 1.22
24/6 1 24.0 6.0 2.15 0.8 1.22
32/8 1 1/4 32.0 8.0 2.40 1.0 1.22
52/13 2 52.0 13.0 2.40 1.0 1.22
Copyringt 2008 SOCOME POWER EQUIPMENT CO.,LTD ALL RIGHTS RESERVED