No.665 Lehu Road, Shahu Industrial Zone,
Liushi town,Yueqing City, Zhejiang Province.
P.C:325604.
Tel:+86 577 62755561 / 62757760
Fax:+86 577 61728670 / 62757761
E-mali:jacky@socomepower.com
        socome@yahoo.cn
Http://www.socomepower.com
Contact to :Jacky Yin (+86 13868763716)
Heat Shrinkable Calbe End Capes (With spiral adhesive coating)
It Offers an economical means of sealing the end of power cable with a completely water tight seal.The internal surface of the end cap has a layer of spiral coated hot melt adhesive.which retains its flexible properties after recovery,HSEC is recommended for application both in open air and on underground power distribution cabler sith PVC.lead or XLPE sheaths.

Effectively offering protection against oxidation ozone,UV-radiation etc. Coated with hot melt adhesive to ensure environment seal
Easily to fit into the cable end
Minimum fully shrink temperatre:120
Technical Data
Property Test method Typical data
Operating temperature IEC 216 -55 to+110
Tensile strength ASTM D 638 >14MPa
Elongation at break ASTM D 638 >400%
Density ASTM D 792 1.05
Elongation at break after aging 150 /168hrs. >300%
Dielectric strength IEC 243 >15kv/mm
Volume resistance IEC 93 >1014.cm
Product dimensions
Normal Size(mm) As supplied(mm) After recovered(mm) Cable diamaeter(mm)
D(Min) D(Max.) A(10%) L(10%) Dw(5%)
21/4 12 4.0 15 40 2.6 4-10
14/5 14 5.0 18 45 2.2 5-12
20/6 20 6.0 25 55 2.8 6-16
25/8.5 25 8.5 30 68 2.8 10-20
35/16 35 16.0 35 83 3.3 17-30
40/15 40 15.0 40 83 3.3 18-32
55/26 55 26.0 50 103 3.5 28-48
75/36 75 36.0 55 120 4.0 45-68
100/52 100 52.0 70 140 4.0 55-90
120/60 120 60.0 70 150 4.0 65-110
145/60 145 60.0 70 150 4.0 70-130
160/82 160 82.0 70 150 4.0 90-150
200/90 200 90.0 70 160 4.2 100-180
Copyringt 2008 SOCOME POWER EQUIPMENT CO.,LTD ALL RIGHTS RESERVED