No.665 Lehu Road, Shahu Industrial Zone,
Liushi town,Yueqing City, Zhejiang Province.
P.C:325604.
Tel:+86 577 62755561 / 62757760
Fax:+86 577 61728670 / 62757761
E-mali:jacky@socomepower.com
        socome@yahoo.cn
Http://www.socomepower.com
Contact to :Jacky Yin (+86 13868763716)
Conductive Calbe End Caps (with comductive mastic)
It offers an economical means of sealing the end of power cable with a perfect waterthight seal.The internal surface of the end cap has a layer of spiral coated hot melt adhesive which retains its flexible properties after recovery. HSEC is recommended for application both in open air and on undergriound power distribution cabler sith PVC,lead or XLPE sheaths

Effectively offering protection against oxidation ozone ,UV-radiation etc .Coated with hot melt adhesive to ensure environment seal
Easily to fit into the cable end
Minimum fully shrink temperature :120
Technical Data
Property Test method Typical data
Operating temperature IEC 216 -55 to+110
Tensile strength ASTM D 638 >14MPa
Elongation at break ASTM D 638 >400%
Density ASTM D 792 1.05
Elongation at break after aging 150 /168hrs. >300%
Dielectric strength IEC 243 >15kv/mm
Volume resistance IEC 93 >1014.cm
Product dimensions
Normal Size(mm) As supplied(mm) After recovered(mm) Conductive mastic weigth Cable diamaeter(mm)
D(Min) D(Max.) A(10%) L(10%) Dw(5%)
25/8.5 25 8.5 30 68 2.8 61g 10-12
42/15 42 15.0 40 110 3.3 101g 18-34
55/23 55 23.0 70 140 3.8 202g 25-48
62/23 62 23.0 70 140 3.8 252g 25-55
75/32 75 32.0 65 150 4.0 303g 42-68
75/36 75 36.0 70 170 4.2 303g 45-68
105/45 105 45.0 65 150 4.0 354g 50-90
Copyringt 2008 SOCOME POWER EQUIPMENT CO.,LTD ALL RIGHTS RESERVED